相对论效应对激光在等离子体中的共振吸收的影响

采用一维粒子模拟(PIC)方法，研究了相对论效应对P偏振激光斜入射非均匀等离子体时产生的共振吸收的影响. 计算表明，弱相对论情况下，在临界面附近产生的电子等离子体波的相对论非线性效应占主要作用；随着入射光场的逐渐增大，吸收率逐渐降低. 当入射光强超过3.7×10¹⁷W/cm²时，由于超短激光脉冲本身在等离子体中产生相对论效应、等离子体波破裂效应，以及参量不稳定过程激发等，吸收系数随着激光强度又开始增加. 固定等离子体密度标长，取不同的激光入射角、电子初始温度，相对论效应对吸收系数的影响是一致的. 关键词： 激光等离子体 相对论效应 共振吸收 粒子模拟     

Simulation of a turbulent premixed open V-shaped flame using contour advection with surgery

Despite its capability of high spatial resolution, simulation of turbulent flows with traditional Lagrangian (front tracking) scheme is often discouraged by numerical instability caused by clustering of marker nodes and topological changes of fronts. Contour advection surgery (CAS), being a robust front tracking scheme, can limit the growth of front complexity during simulation without jeopardizing accuracy or efficiency. This allows it to open up an advantage over traditional front-tracking schemes. It has already been demonstrated that CAS, with incorporation of the reaction sheet model, can accurately simulate the propagation and advection of a turbulent premixed V-shaped flame. In this study, it is further tested with 10 values of vortex circulation. A range of upstream turbulence levels of 1.8–19.8% was obtained. Results indicate that upstream turbulence increase the average flame length, flame zone area and the overall burning rate. Flame surface density Σ was also estimated. Maximum values of Σ obtained lie in the range 0.1–1.4 mm⁻¹. Skewness towards the burnt region was observed in all profiles of Σ. Similar to results from laboratory experiments, it was found that Σ values decreases with upstream turbulence. From this study, the ability of CAS to cope with intense turbulence is demonstrated and a better quantitative understanding on the scheme has also been acquired.     

一类Marangoni对流边界层方程的近似解析解

利用Adomain解析拆分和Padé逼近方法对由Marangoni对流诱发的层流边界层问题进行了研究, 提供了一种求解边界层方程的解析分析方法. 得到了问题的近似解析解并对相应的流动及传热特性进行了探讨. 本文所提出的思想方法可以用于解决其他科学和工程技术问题. 关键词： Marangoni对流 非线性 Adomain拆分法 近似解析解     

The periodic wave solutions for the (2 + 1)-dimensional Konopelchenko–Dubrovsky equations

More periodic wave solutions expressed by Jacobi elliptic functions for the (2 + 1)-dimensional Konopelchenko–Dubrovsky equations are obtained by using the extended F-expansion method. In the limit cases, the solitary wave solutions and trigonometric function solutions for the equations are also obtained.     

On a nonlinear multigrid algorithm with primal relaxation for the image total variation minimisation

Digital image restoration has drawn much attention in the recent years and a lot of research has been done on effective variational partial differential equation models and their theoretical studies. However there remains an urgent need to develop fast and robust iterative solvers, as the underlying problem sizes are large. This paper proposes a fast multigrid method using primal relaxations. The basic primal relaxation is known to get stuck at a ‘local’ non-stationary minimum of the solution, which is usually believed to be ‘non-smooth’. Our idea is to utilize coarse level corrections, overcoming the deadlock of a basic primal relaxation scheme. A further refinement is to allow non-regular coarse levels to correct the solution, which helps to improve the multilevel method. Numerical experiments on both 1D and 2D images are presented.     

聚酰胺酸合成工艺研究

 采用超声波在线测量溶液粘度的方法，研究了合成聚酰胺酸过程中实验条件的影响，并对实验结果进行分析，由此确定了合成高分子量聚酰胺酸的最佳实验条件。研究表明：在加料次序为先加二胺后加二酐（二酐与二胺的摩尔比为1.01～1.02：1）、试剂中含水量尽可能少，反应温度0～5℃、反应时间以溶液粘度到达最大值为止的条件下，所合成的聚酰胺酸溶液粘度最大，可满足惯性约束聚变（ICF）充气腔靶端口膜的需要。     

高温超导薄膜微波非线性研究的进展

文章介绍了高温超导薄膜微波非线性的主要特征，阐述了高温超导薄膜微波非线性产生的原因和相关的研究现状，指出了高温超导薄膜非线性研究中遇到的困难和尚未解决的问题．     

Elevation of the glass transition temperature in flexible‐chain semicrystalline polymers

In the idealized two‐phase model of a semicrystalline polymer, the amorphous intercrystalline layers are considered to have the same properties as the fully‐amorphous polymer. In reality, these thin intercrystalline layers can be substantially influenced by the presence of the crystals, as individual polymer molecules traverse both crystalline and amorphous phases. In polymers with rigid backbone units, such as poly(etheretherketone), PEEK, previous work has shown this coupling to be particularly severe; the glass transition temperature (T_g) can be elevated by tens of degrees celsius, with the magnitude of the elevation correlating directly with the thinness of the amorphous layer. However, this connection has not been explored for flexible‐chain polymers, such as those formed from vinyl‐type monomers. Here, we examine T_g in both isotactic polystyrene (iPS) and syndiotactic polystyrene (sPS), crystallized under conditions that produce a range of amorphous layer thicknesses. T_g is indeed shown to be elevated relative to fully‐amorphous iPS and sPS, by an amount that correlates with the thinness of the amorphous layer; the magnitude of the effect is severalfold less than that in PEEK, consistent with the minimum lengths of polymer chain required to make a fold in the different cases. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1198–1204, 2007     

Effect of carbon content on the microstructure and the cracking susceptibility of Fe-based laser-clad layer

The laser cladding of Fe-based alloys on a medium carbon steel substrate was performed using a CO₂ laser and Ar shielding gas that was blown into a molten pool. The microstructure and cracking susceptibility of the laser-clad layers were studied in terms of carbon additions. Results show that the small change of the carbon content in the alloy powders can obviously change the microstructure and properties of the layers. When the carbon content is in the range of 0.3–0.4 wt.%, the decrease of the carbon content in alloy powders will increase the hardness and toughness of the layers simultaneously under the same process parameters. As a result, crack-free coatings with high hardness can be obtained. As the carbon content increases from 0.2 wt.% to 0.4 wt.%, the segregation ratio of chromium increases, while the segregation ratios of nickel, manganese, and silicon first decrease and then increase. At the same time, a new designing principle concerning the composition and microstructure has been put forward, and the principal mechanisms of strengthening and toughening of the layers are fine-grain strengthening and low carbon martensitic phase transformation strengthening.     

Polynomial-time approximation schemes for packing and piercing fat objects

We consider two problems: given a collection of n fat objects in a fixed dimension, (1) ( packing) find the maximum subcollection of pairwise disjoint objects, and (2) ( piercing) find the minimum point set that intersects every object. Recently, Erlebach, Jansen, and Seidel gave a polynomial-time approximation scheme (PTAS) for the packing problem, based on a shifted hierarchical subdivision method. Using shifted quadtrees, we describe a similar algorithm for packing but with a smaller time bound. Erlebach et al.'s algorithm requires polynomial space. We describe a different algorithm, based on geometric separators, that requires only linear space. This algorithm can also be applied to piercing, yielding the first PTAS for that problem.